QOLTEC Gigabit Network Switch 5× RJ45, 1000 Mb/s, Plug & Play
QOLTEC Gigabit Network Switch 5× RJ45, 1000 Mb/s, Plug & Play
Discover the full potential of your multimedia setup. This QOLTEC gigabit switch ensures stable, seamless data switching and lets you distribute a signal from one source to up to four devices simultaneously. Ideal for movies, gaming, and presentations — without complex configuration or extra costs.
Install in moments thanks to Plug & Play. Shielded 8‑pin RJ45 ports protect against electromagnetic interference, and efficient heat dissipation keeps operation stable even under higher loads. LED indicators clearly show activity and port status, so you’re always in control of your network.
- 5× RJ45 with automatic MDI/MDI‑X crossover for effortless connectivity.
- Supports 100 Mb/s (throughput 14 880 packets/s) and 1000 Mb/s (throughput 14 800 packets/s) for smooth data exchange.
- Full duplex per IEEE 802.3X, flow control in half‑duplex.
- Supports up to 1024 MAC addresses for efficient traffic management.
- LED status indicators for easy monitoring.
- Signal range up to 150 m depending on installation conditions.
- Plug & Play — no additional configuration.
Setup is simple: connect your devices to the appropriate RJ45 ports, link one port to your router or modem, and check activity via the LEDs. In just a few steps, your network is ready to go.
Specifications
- Number of ports
- 5 × RJ45
- Automatic MDI/MDI‑X
- Yes, on all ports
- Data rates
- 100 Mb/s, 1000 Mb/s
- Packet throughput
- 100 Mb/s: 14 880 packets/s; 1000 Mb/s: 14 800 packets/s
- Duplex mode
- Full duplex per IEEE 802.3X; flow control in half‑duplex
- MAC addresses
- Supports up to 1024 addresses
- Ports
- Shielded 8‑pin RJ45
- LED indication
- Port status and activity indicators
- Installation
- Plug & Play (no configuration required)
- Signal range
- Up to 150 m
- Cooling
- Efficient heat dissipation for stable operation
- Usage type
- Forwarding a signal from one source to up to four devices simultaneously
