Fast and precise FDM 3D printer with Klipper firmware, a build volume of 225 × 225 × 265 mm, direct drive extruder, and nozzle up to 300 °C. Offers print speeds up to 500 mm/s, 121-point automatic leveling, smart zoned heating of the heated bed, and support for a wide range of materials including PLA, PETG, ABS, TPU, and nylon.
Speed and quality thanks to Klipper
Maximum speed up to 500 mm/s and advanced Input Shaping and Pressure Advance features for smooth surfaces and sharp details without ringing.
Stable mechanics and precise motion
Metal X/Y guides and a reinforced Y-axis profile ensure smooth operation, reduced vibrations, and higher print quality even at high speeds.
Intuitive control and connectivity
Detachable 4.3" touch panel, model preview, and convenient file transfer via USB and LAN for an efficient workflow.
Elegoo Neptune 4 Pro combines high performance with precise mechanics for reliable, high-quality printing. Thanks to the mainboard running Klipper firmware, a powerful 64-bit processor, and features like Input Shaping and Pressure Advance, it achieves clean details even at higher speeds. The direct drive extruder with dual gears and a hotend with a copper–titanium heatbreak ensure smooth feeding and stable material flow up to 300 °C.
121-point (11 × 11) automatic leveling and a flexible build plate with zoned heating (150 W + 100 W) shorten setup time and reduce energy consumption. Metal X/Y rails and a reinforced Y-axis deliver high stability and smooth motion, resulting in better surface quality and consistent prints.
Benefits for you:
- Fast printing without compromise – recommended 250 mm/s, max. up to 500 mm/s.
- Wide filament compatibility – PLA, PETG, ABS, TPU, nylon.
- Smart features – filament sensor, power-loss recovery, LED lighting.
- Intuitive control – detachable 4.3" touchscreen, file transfer via USB and LAN.
Specifications
- Manufacturer
- ELEGOO
- Model
- Neptune 4 Pro
- Firmware
- Klipper
- Build volume
- 225 × 225 × 265 mm
- Maximum print speed
- up to 500 mm/s (recommended approx. 250 mm/s)
- X/Y axes
- All-metal rails with two U-shaped ball bearings
- Extruder
- Direct drive with dual gears (approx. 291 g)
- Max. nozzle temperature
- 300 °C
- Heated bed
- Intelligent zoned heating 150 W + 100 W
- Automatic leveling
- 11 × 11 mesh (121 points) + assisted manual fine-tuning
- Cooling
- Two bidirectional 4015 fans + four 4020 fans, up to 10,000 RPM
- Supported materials
- PLA, PETG, ABS, TPU, nylon
- File transfer
- USB, LAN
- Other features
- Input Shaping, Pressure Advance, filament sensor, power-loss print recovery, LED lighting
