SUNLU Fila Dryer S2 is a powerful filament dryer for 3D printing that, thanks to 360° circulating heating, quickly removes moisture and helps achieve smoother surfaces, better layer adhesion, and more stable prints. It offers a touch LCD display, drying while printing, quiet operation, and support for common filament diameters.
Even 360° drying for stable print quality
Advanced 360° circulating heating dries the filament evenly across the entire spool. It helps reduce stringing, bubbles, and nozzle clogging, and improves detail accuracy and layer strength.
Touch LCD display and quick material setup
The touch LCD display lets you conveniently set the temperature and drying time, choose the filament type, and operate clearly without complicated setup. Ideal for quick switching between different materials.
Drying even while printing
Fila Dryer S2 allows you to dry filament while printing, so the material stays in optimal condition throughout the entire job. A great solution for longer print tasks and hygroscopic filaments.
Wet filament often causes stringing, popping, nozzle clogging, or weak layers. The Sunlu S2 filament dryer (Fila Dryer S2) dries the material at a controlled temperature so the filament returns to optimal condition and you get more accurate and stronger prints.
Thanks to 360° even heat circulation, moisture is removed consistently from the entire spool, which is crucial especially for more demanding materials. Control via a large touch LCD display makes it easy to set temperature, time, and filament type—without unnecessary trial and error.
Main benefits:
- Drying while printing – filament stays dry throughout the whole process
- Wide material compatibility (PLA, PETG, TPU, ABS, PA, PC and more)
- Supported diameters 1.75 / 2.85 / 3.00 mm
- Quiet operation under 10 dB – suitable even for a home workshop
- Recommended drying time 3–6 hours depending on material and humidity
Specifications
- Manufacturer
- Sunlu
- Model
- Fila Dryer S2
- Drying temperature range
- 45–70 °C
- Temperature range by material
- PLA/PLA+/WOOD: 45–50 °C
PETG/PVB/ABS/ABS+/HIPS/PVA/ASA/TPU/PMMA: 50–55 °C
PA/PC: 60–70 °C - Recommended drying time
- 3–6 h
- Heating system
- 360° circulating heating
- Display
- Touch LCD display
- Controls
- Touch panel, one-click setup
- Supported filament diameters
- 1.75 mm / 2.85 mm / 3.00 mm
- Material compatibility
- PLA, PLA+, PETG, TPU, ABS, PA, PC and more
- Operating feature
- Drying while printing
- Noise level
- <10 dB
