Gray Anycubic Water-Wash Resin+
Gray Anycubic Water-Wash Resin+
Low Cost and High Efficiency
The Anycubic Water-Wash Resin+ allows for cleaning without the need for alcohol, only water. This reduces maintenance costs and increases process efficiency.
Safety and Convenience
Low odor emissions product, suitable for those looking for environmentally friendly materials for 3D printing.
Faster Printing
Due to its lower viscosity, the resin offers faster printing and shorter exposure times, resulting in increased productivity.
Anycubic Water-Wash Resin+ makes maintenance of prints easier due to the possibility of washing with water, which reduces cleaning costs and avoids the use of alcohol. Models printed with this resin are detailed and resistant to mechanical damage.
Safety and comfort are ensured by low odor emissions, making this resin an ideal choice for daily use, even for those with environmental consciousness.
Thanks to lower viscosity, the Anycubic Water-Wash Resin+ allows faster printing and shorter exposure times, thus increasing efficiency and compatibility with various UV wavelengths (365-405 nm).
Specifications
- UV Wavelength:
- 365-405 nm
- Density:
- 1.15-1.20 g/cm3
- Viscosity:
- 150-250 mPa-s at 25 °C
- Hardness:
- 80 Shore D
- Tensile Strength:
- 30-45 MPa
- Elongation at Break:
- 8%-15%
- Tensile Elasticity:
- 1600-1800 MPa
- Flexural Strength:
- 50-60 MPa
- Flexural Modulus:
- 1500-1600 MPa
- Exposure time for bottom layer:
- 20-70s
- Standard Exposure Time:
- 1.5-10s
- Recommended printing parameters:
- Layer Thickness: 0.05 mm
- Exposure Time: 1.5s to 8s
- No Exposure Time: 5.5-2.5s
- Bottom Layer Exposure Time: 20s to 35s
- Number of Bottom Layers: 2-6
- Smoothing: 1/16
- Z Lift Distance: 4 mm to 10 mm
- Z Lift Speed: 2mm/s to 6mm/s
- Z Retract Speed: 2mm/s to 6mm/s
Similar products
