Universal network cable for home and office installations. Offers speeds up to 100 Mb/s, unshielded U/UTP design, a 305 m pull box, and CCA conductors (copper-clad aluminum) in AWG 24 format. Suitable for short runs up to 10 m without a Fluke certification requirement.
This green UTP LAN cable is ideal for basic Ethernet wiring with 100 Mb/s speed and frequencies up to 100 MHz. The CCA solid AWG 24 conductor construction ensures easy termination and stable transmission over short distances. Supplied in a practical pull box with a meter length marking to simplify measuring and installation.
Thanks to its unshielded U/UTP design, the cable is suitable for non-demanding environments without strong electromagnetic interference. Recommended use is for patches up to 10 m in networks without a requirement for EN 50173 (Fluke) certification.
- Performance: 100 Mb/s, up to 100 MHz, reach 100–120 m (recommended up to 10 m for optimal results)
 - Construction: solid wire AWG 24 (4×2×0.5 mm), HDPE insulated conductors 0.93 mm, PVC jacket 5.0 mm
 - Practical packaging: 305 m in a carton, meter printing every 1 m
 - Color: green RAL 6024 for easy route identification
 - Intended use: home and office installations without Fluke measurement requirements
 
Specifications
- Cable type
 - LAN U/UTP (unshielded)
 - Data rate
 - 100 Mb/s
 - Package length
 - 305 m
 - Conductor material
 - CCA (copper-clad aluminum)
 - AWG
 - 24 (4×2×0.5 mm)
 - Conductor construction
 - solid wire
 - Color
 - green RAL 6024
 - Length marking
 - yes, every 1 m
 - Outer jacket
 - PVC, 5.0 mm diameter
 - Conductor insulation
 - HDPE, 0.93 mm
 - Operating frequency
 - up to 100 MHz
 - Packaging
 - carton
 - Conductor resistance (max.)
 - 60–90 Ω / 305 m
 - Insulation resistance (min.)
 - 5000 MΩ·km
 - Pair-to-ground capacitance
 - < 330 pF / 100 m
 - Characteristic impedance
 - 100 Ω (±15)
 - Storage temperature
 - 0 to 60 °C
 - Operating temperature
 - -20 to 70 °C
 - Recommended segment length
 - up to 10 m
 - Maximum achievable distance
 - 100–120 m
 - Standards/certification
 - no Fluke requirement (EN 50173)