Lanberg switch 24× 100 Mb/s PoE+ with 2× combo gigabit uplinks, 250 W, 19" rack
Lanberg switch 24× 100 Mb/s PoE+ with 2× combo gigabit uplinks, 250 W, 19" rack
250 W PoE budget for 24 devices
24 PoE+ 10/100 Mb/s ports power and carry data over a single cable. A real 250 W budget lets you power up to 16 802.3af devices (15 W/port) or 8 802.3at devices (30 W/port) simultaneously.
2 combo gigabit uplinks and longer reach
Two combo gigabit uplinks (RJ‑45/SFP) link the PoE segment with the network backbone—e.g., NVR and LAN/Internet at the same time. Extend mode stretches PoE and data up to 250 m (10 Mb/s) while activating VLAN isolation for ports 1–24.
Smart protection and reliability
If the PoE budget is exceeded, the switch progressively disconnects ports starting from the highest number, so priority devices on lower-numbered ports keep running. Built-in 4 kV surge protection reduces the risk of damage during voltage spikes.
Lanberg RSFE-24P-2C-250 powers and carries data over a single cable thanks to PoE/PoE+ (IEEE 802.3af/at). It saves time and the cost of separate electrical installation and simplifies deployment in large sites where endpoints have no available outlet—ideal for IP cameras, VoIP phones, Wi‑Fi access points, and access control systems.
- 24× PoE+ 10/100 Mb/s ports for power and data over a single cable
- 2× combo gigabit uplink (RJ‑45/SFP) to connect to the network backbone (e.g., NVR + LAN/Internet simultaneously)
- Real PoE budget 250 W: up to 16 802.3af devices (≤15 W/port) or 8 802.3at devices (≤30 W/port) at once
- Extend mode up to 250 m (10 Mb/s) with VLAN isolation of ports 1–24 for safer monitoring
- Intelligent port shutdown from the highest number when the PoE budget is exceeded—connect priority devices to lower-numbered ports
- 4 kV surge protection on all ports for higher resilience
- Metal chassis, LED indicators, and 19" rack accessories in the box
Thanks to a thoughtful design and quality components, this switch is a reliable foundation for surveillance, security, and enterprise networks where stability and uninterrupted 24/7 operation are critical.
Specifications
- Brand
- Lanberg
- Model
- RSFE-24P-2C-250
- Number of PoE ports
- 24× 10/100 Mb/s (Fast Ethernet)
- PoE standards
- IEEE 802.3af, IEEE 802.3at (PoE+)
- Total PoE budget
- 250 W
- Max. power per port
- 15 W (802.3af), 30 W (802.3at)
- Uplink ports
- 2× combo gigabit (RJ‑45/SFP)
- Uplink speed
- 10/100/1000 Mb/s
- Extend mode
- Up to 250 m per cable (speed 10 Mb/s)
- VLAN in Extend mode
- Isolation of ports 1–24
- Intelligent PoE management
- Port shutdown from the highest number when the budget is exceeded
- Surge protection
- 4 kV on all ports
- Mounting
- 19" rack
- Accessories in the box
- 19" rack ears and a set of screws (excluding M6)
- Build
- Metal chassis, status LEDs
- Typical use
- IP CCTV, VoIP, Wi‑Fi APs, access and security systems
