AXAGON USB 3.2 Gen 2 adapter for M.2 NVMe/SATA SSD with 10 cm USB‑C cable
575370-1
€30.90
Compact AXAGON adapter for M.2 NVMe and SATA with USB‑C and speeds up to 10 Gb/s. UASP, TRIM, and S.M.A.R.T. support, 10 cm cable, LED indicator, wide compatibility.
AXAGON USB 3.2 Gen 2 adapter for M.2 NVMe/SATA SSD with 10 cm USB‑C cable
575370-1
Compact AXAGON adapter for M.2 NVMe and SATA with USB‑C and speeds up to 10 Gb/s. UASP, TRIM, and S.M.A.R.T. support, 10 cm cable, LED indicator, wide compatibility.
€30.90
Compact USB 3.2 Gen 2 adapter for M.2 NVMe and SATA drives with a USB‑C connection and speeds up to 10 Gb/s. It offers UASP, TRIM, and S.M.A.R.T. support, easy drive swaps, and efficient heat dissipation without limiting M.2 length. Ideal for testing, transferring, recovering, and backing up data.
The universal AXAGON adapter for M.2 SSDs combines the fast USB 3.2 Gen 2 (10 Gb/s) interface with support for both NVMe (PCIe) and SATA (AHCI) standards. Thanks to the fixed 10 cm USB‑C cable, you can easily connect it to desktops, laptops, and mobile devices. The open design does not impede heat dissipation, helping to prevent thermal throttling and extending the drive’s lifespan.
Installation takes moments—simply insert the drive into the slot and you’re ready to go. The adapter supports advanced features UASP, TRIM, and S.M.A.R.T. for higher performance, stability, and SSD health monitoring. With cross‑platform compatibility, it’s an excellent tool for quick drive testing, large data transfers, recovery, and backups.
- Speeds up to 10 Gb/s: fully leverages the performance of modern M.2 SSDs.
- NVMe and SATA in one: no need to worry about drive type—the adapter handles them all.
- UASP, TRIM, S.M.A.R.T.: higher speeds, lower latency, and drive health monitoring.
- Wide compatibility: Windows, macOS, Linux, Chrome OS, and mobile systems.
- Compact design: just 55 × 37 × 12 mm and 19 g, ideal for travel.
Specifications
- Interface (input)
- USB 10 Gb/s (USB 3.2 Gen 2), USB‑C connector (male)
- Interface compatibility
- USB 3.2 Gen 1, USB4, Thunderbolt 3/4
- Supported drives
- M.2 NVMe SSD (PCIe), M.2 SATA SSD (AHCI)
- M.2 keying
- M‑key or B+M‑key; NGFF 75‑pin M‑key slot
- M.2 length
- No length limit; supports single‑sided and double‑sided modules
- USB transfer rates
- 10 000 / 5 000 / 480 Mbit/s
- Interface throughput (theoretical)
- Up to 10 Gbit/s (USB 3.2 Gen 2)
- Throughput (real‑world)
- Approximately 1,000 MB/s (1 GB/s), subject to USB 3.2 Gen 2 limits
- Compliance specifications
- PCI Express Base Specification Rev. 3.1a; NVM Express 1.3; Serial ATA 3.2 (SATA/600) up to 6 Gb/s; USB Mass Storage Class
- Supported protocols
- BOT (Bulk‑Only Transport), UASP (USB Attached SCSI)
- Supported features
- TRIM, S.M.A.R.T., booting from external SSD, Hot Plug, Plug and Play, power‑saving mode when idle
- Power
- From USB bus, up to 900 mA from a single port
- Indicators
- Blue LED: connection (solid), activity (blinking)
- Adapter dimensions
- 55 × 37 × 12 mm
- Adapter weight
- 19 g
- Cable length
- 10 cm (USB‑C male)
- Supported OS
- Windows 7/8.1/10/11 and later, macOS, iPadOS, iOS, Linux, Chrome OS, Android (compatibility depends on OS updates and vendor support)
