LAN cable UTP 100 Mb/s 305 m CCA, red
846202-1
€37.90
UTP LAN cable 305 m, 100 Mb/s, CCA, AWG 24, red RAL3017. Cost-effective solution for short runs, meter markings, unshielded, up to 100 MHz.
LAN cable UTP 100 Mb/s 305 m CCA, red
846202-1
UTP LAN cable 305 m, 100 Mb/s, CCA, AWG 24, red RAL3017. Cost-effective solution for short runs, meter markings, unshielded, up to 100 MHz.
€37.90
Reliable network cable for basic data cabling over shorter distances. Offers speeds up to 100 Mb/s, unshielded U/UTP design, length of 305 m, CCA conductors (copper-clad aluminum), and a distinctive red RAL3017 color. Suitable for cost-effective installations without a Fluke certification requirement.
This UTP cable is an ideal choice for budget-friendly, less demanding applications. Thanks to its CCA (copper-clad aluminum) construction and solid AWG 24 conductors, it is suitable for short runs where stable 100 Mb/s connectivity up to 100 MHz is required. The red RAL3017 finish helps with route identification in cabinets and cable trays.
Supplied in a carton with meter markings every 1 m for precise measuring. The cable features a PVC jacket with a 5.0 mm diameter and HDPE conductor insulation, ensuring good workability and basic mechanical protection in indoor installations.
- Performance and compatibility: up to 100 Mb/s, operating frequency up to 100 MHz, recommended for segments of approx. 10 m.
- Construction: U/UTP (unshielded), solid AWG 24 (4 pairs), CCA conductors for cost savings.
- Easy installation: meter markings, carton pull-out from the box, red color for quick identification.
- Intended use: installations without Fluke certification requirements (EN 50173), short patch runs, low-cost cabling.
Specifications
- Cable type
- LAN U/UTP (unshielded)
- Data rate
- 100 Mb/s
- Pack length
- 305 m (carton)
- Conductor
- CCA, solid
- AWG
- 24 (4×2×0.5 mm)
- Jacket diameter
- 5.0 mm (PVC)
- Conductor insulation
- HDPE, 0.93 mm
- Color
- Red RAL3017
- Operating frequency
- up to 100 MHz
- Meter marking
- yes, every 1 m
- Conductor resistance (max.)
- 60–90 Ω / 305 m
- Insulation resistance (min.)
- 5000 MΩ·km
- Pair-to-ground capacitance
- < 330 pF / 100 m
- Characteristic impedance
- 100 Ω (±15)
- Storage/transport temperature
- 0 to +60 °C
- Operating temperature
- −20 to +70 °C
- Recommended segment length
- up to 10 m (maximum reach 100–120 m depending on conditions)
- Standard/certification
- Intended for installations without Fluke certification requirement (EN 50173)
