AXAGON 9‑in‑1 multiport USB‑C hub with M.2 NVMe/SATA, HDMI 4K/60 Hz, PD 100 W, Gigabit LAN and card reader
710897-1
Discount 9%
€117.00
€107.00
9‑in‑1 USB‑C hub with M.2 NVMe/SATA, HDMI 4K/60 Hz, 2× USB‑A 10 Gbps, Gigabit LAN, audio DAC, and SD/microSD reader. 100 W PD. Compatible with Thunderbolt 3/4.
AXAGON 9‑in‑1 multiport USB‑C hub with M.2 NVMe/SATA, HDMI 4K/60 Hz, PD 100 W, Gigabit LAN and card reader
710897-1
9‑in‑1 USB‑C hub with M.2 NVMe/SATA, HDMI 4K/60 Hz, 2× USB‑A 10 Gbps, Gigabit LAN, audio DAC, and SD/microSD reader. 100 W PD. Compatible with Thunderbolt 3/4.
Discount 9%
€117.00
€107.00
Expand your notebook, PC, or tablet with a universal docking station featuring an integrated bay for M.2 SSDs. The hub offers 10 Gbps USB, video via HDMI 4K/60 Hz, Gigabit Ethernet networking, high‑quality audio with a 384 kHz/24‑bit DAC, an SD/microSD reader, and 100 W Power Delivery. Compatibility with Thunderbolt 3/4 and the 65 cm USB‑C cable make it a handy all‑in‑one.
This compact 9‑in‑1 docking station turns a single USB‑C port on your device into a rich set of connectors. The integrated external bay for M.2 NVMe and SATA SSDs (2242/2260/2280, M‑key/B+M‑key) turns the hub into a fast external storage device with support for TRIM, UASP, and S.M.A.R.T. reading. The aluminum lid, included passive heatsink, and ventilation openings ensure efficient heat dissipation.
Output video via HDMI up to 4K/60 Hz with HDR support, connect peripherals to 2× USB‑A 10 Gbps and USB‑C 5 Gbps. Charging is handled by USB‑C Power Delivery 3.0 up to 100 W — powering both your laptop and the hub itself. Also included are Gigabit LAN, a dual SD/microSD reader with parallel reading, and 3.5 mm audio with a high‑quality 384 kHz/24‑bit DAC. Rubber pads and smart cable stowage wrapped around the base keep your desk tidy.
- Video: HDMI up to 4K/60 Hz, 2K/144 Hz, 1080p/240 Hz; HDR, HDCP 1.4/2.2
- USB: 2× USB‑A 10 Gbps + 1× USB‑C 5 Gbps (data/PD), charging up to 7.5 W per port
- Storage: M.2 NVMe/SATA, 2242/2260/2280, TRIM, UASP, S.M.A.R.T., boot support
- Network: Gigabit Ethernet RJ‑45 10/100/1000 Mb/s
- Audio: 3.5 mm 4‑pole, output 384 kHz/24‑bit, microphone input 192 kHz/24‑bit
- Power: USB‑C PD up to 100 W (Power Delivery 3.0)
- Compatibility: USB4/Thunderbolt 3/4, Plug & Play, Hot Plug, support for phones with USB‑C
Specifications
- Input (data connection)
- USB 10 Gbps (USB 3.2 Gen 2), USB‑C male connector; compatible with USB 5 Gbps, USB4, and Thunderbolt 3/4.
- Input (power)
- USB‑C Power Delivery 3.0 up to 100 W (female). Laptop powering through the hub; both the device and the charger must support PD.
- USB ports
- 2× USB‑A 10 Gbps; 1× USB‑C 5 Gbps (data or PD charging). Charging mobile devices up to 1.5 A/5 V from both USB‑A and USB‑C ports.
- HDMI output
- 1× HDMI (Type A female).
- Maximum resolution
- 1 monitor: up to 4K/60 Hz (Ultra HD), 2K/144 Hz (Quad HD), 1080p/240 Hz (Full HD).
- Video features
- On macOS the maximum refresh rate is often limited to 60 Hz. To achieve maximum parameters, a USB‑C port with DP Alt Mode at least 1.4 or Thunderbolt 4 is required, along with an up‑to‑date OS and graphics drivers. Supports HDR (10‑bit), Hot Plug, TMDS, HDCP 1.4/2.2. Audio up to 8 channels LPCM, support for AC‑3, DTS, and HBR; sampling up to 192 kHz/24‑bit (depending on the source and sink device).
- Card reader
- Two slots: microSD (microSD/microSDHC/microSDXC/TransFlash) and SD (SD/SDHC/SDXC, MMC 4.0, MMC, RS‑MMC; with adapter for miniSD, microSD…). Capacity support up to 2 TB; 2 LUNs — shown as two drives; direct card↔card copying; simultaneous operation of both slots.
- Network connection RJ‑45
- Gigabit Ethernet 10/100/1000 Mb/s, auto‑negotiation; IEEE 802.3i/802.3u/802.3ab standards; UTP/STP connection.
- Audio input/output
- 1× 3.5 mm 4‑pole jack for headphones/headset/active speakers; 2‑channel analog stereo output 384 kHz/24‑bit; analog microphone input 192 kHz/24‑bit.
- M.2 SSD slot
- Supports NVMe and SATA M.2; M‑key or B+M‑key cards; NGFF 75‑pin M‑key; sizes 2242/2260/2280; single‑sided and double‑sided SSDs. Compliant with PCI Express Base Spec 3.1a, NVM Express 1.3, Serial ATA 3.2 (6 Gb/s). USB Mass Storage Class, UASP, TRIM, boot support; S.M.A.R.T. reading.
- Other features
- Plug & Play, Hot Plug, standby support; bus‑powered via USB or via PD (charger not included). Aluminum lid of the M.2 bay for better heat dissipation, included passive heatsink; ventilation openings. LED connection indicator. High‑quality shielded cable for high speed and minimal interference. Rubber pads against slipping; smart cable attachment and winding around the base.
- Cable
- 65 cm USB‑C connection cable.
- Dimensions
- 32 × 110 × 100 mm (H × W × D).
- Weight
- 213 g (including cable).
- Requirements
- For video output, a USB‑C port with DisplayPort Alt Mode (or Thunderbolt 3/4) is required; for charging, both the device and the charger must support PD.
- Supported operating systems
- Windows 10/11, macOS, iPadOS, iOS, Linux, Chrome OS, Android. Compatibility depends on the OS and the device vendor’s support; DP Alt Mode is supported in up‑to‑date operating systems and depending on device support; keeping graphics drivers up to date is recommended.
