Power cameras, access points, or automation components directly over Ethernet. The switch supports IEEE 802.3af/at/bt including PoE++ (up to 90 W on a selected port) and, if power is insufficient, can intelligently disconnect PoE ports based on priority.
The compact metal chassis with passive cooling is suitable for control cabinets and harsh environments. Thanks to DIN-rail mounting, installation is quick and tidy even in tight spaces.
Two SFP 1000BASE‑X slots enable uplink via fiber or copper SFP modules. This makes it easy to connect remote network points, poles, or cabinets and improve transmission stability between segments.
Lanberg ILGE is an unmanaged (Plug & Play) industrial PoE switch designed for large and demanding installations—from manufacturing and SCADA to outdoor camera systems, lighting infrastructure, alarms, and IoT. By combining data transmission and power over a single Ethernet cable, you can easily connect end devices such as cameras, recorders, access points, controllers, and sensors.
Industrial port set and fiber uplink
Practical features for stable operation: VLAN mode helps separate traffic between ports and reduce broadcasts; EXTEND mode enables up to about 250 m on a single cable run (typically at the cost of reduced speed, suitable e.g. for monitoring). The switch also supports automatic MDI/MDI‑X, Flow control, MAC auto‑learning, and store‑and‑forward switching with CRC checking. When available PoE power is exceeded, it can selectively disconnect PoE ports (starting from the highest-numbered port), helping you set power priorities for connected devices.
Rugged design for control cabinets: the metal enclosure and passive cooling support long-term operation. Recommended operating conditions are -25 to 65 °C and 10–90% humidity. You’ll also benefit from 6 kV surge protection. The power supply is included in the package.
