Marimex pH- is a practical product for lowering the pH of pool water to the ideal level of 6.8–7.2. It helps reduce mineral cloudiness, the formation of limescale and deposits, while also decreasing water irritation and the risk of an increased level of combined chlorine, which is often the cause of the typical “chlorine” smell.
If the pH of the water is too high (above 7.2), the water may become cloudy, deposits can form, and irritation increases. Marimex pH- is intended for regular pH adjustment and for keeping the water within a comfortable and hygienically suitable range.
Suitable use
- Above-ground pools
- In-ground pools
- Hot tubs
- For pools with fresh or salt water
Dosage and use
- To lower pH by 0.2, dose about 15 g of product per 1 m³ (1000 l) of water.
- Dissolve the measured dose in a plastic watering can and pour in slowly into the pool with the filtration running.
- Wait for thorough mixing of the water by filtration.
- If the pH does not reach the required value, repeat the procedure.
- It is necessary to ensure no people are in the pool during application.
- 250 g of product corresponds approximately to a measuring scoop volume of 150 ml.
- Detailed dosing instructions are provided on the packaging.
Specifications
- Brand
- Marimex
- Product type
- pH- (pH reduction)
- Form
- Powder
- Pack weight
- 2.7 kg
- Packaging
- Resealable plastic container
- Ideal water pH
- 6.8–7.2
- Dosage
- approx. 15 g per 1 m³ (1000 l) to lower pH by 0.2
- Suitable for
- Above-ground pools, in-ground pools, hot tubs
- Water type
- Fresh and salt
